能量回收型减振器的设计与分析(含CAD零件图装配图,STEP三维图)

能量回收型减振器的设计与分析(含CAD零件图装配图,STEP三维图)(任务书,开题报告,文献摘要,外文翻译,论文说明书13000字,CAD图6张,STEP三维图)
摘要
减振器是车辆悬架的组成部分，它能够迅速减小车辆的振动，提高车辆的行驶平顺性和舒适性。常规的减振器是通过将振动转化为热能的方式来快速减振，本文在查阅了大量国内外能量回收型减振器的设计与分析资料后，对比多种现有的常规减振器，旨设计一种不仅能够完成常规的减振功能，而且能够回收本该散失掉的能量的新型减振器。本文通过对各种能量回收型减振器的方案分析，选出了液电馈能式减振器，并且设计了液电馈能式减振器的方案，对该方案中的各个构件进行参数计算及选型，在初步完成液电馈能式减振器的设计后，对其存在的一些问题进行分析找出原因，并且提出改进方案，同时对未来减振器的发展作合理的推测与展望。
关键词：能量回收型减振器；液电馈能式减振器；方案设计；问题分析改进
 
Abstract
The shock absorber is an integral part of the vehicle suspension, which can quickly reduce the vibration of the vehicle and improve the ride comfort and comfort of the vehicle. Conventional shock absorber is through the vibration into heat energy to quickly reduce the way, in this paper access to a large number of domestic and international energy recovery shock absorber design and analysis of information, compared to a variety of existing conventional shock absorbers, It is a new type of shock absorber which can not only complete the conventional vibration damping function but also recover the energy that is scattered. In this paper, through the analysis of various energy recovery type shock absorber, the liquid electric energy feedback damper is selected, and the scheme of the liquid feedforward damper is designed, and the parameters of each component in the scheme Calculation and selection, in the initial completion of the design of liquid electric energy booster, the existence of some of its problems to find out the reasons for the analysis, and proposed improvements, while the future development of the shock absorber reasonable reasoning and looking ahead.

[来源：http://www.think58.com]

Key Words：Energy recovery type shock absorber;Liquid feedforwardshock absorber;Design,and analysis;Improvement
 

[资料来源：http://www.THINK58.com]

[资料来源：http://think58.com]

目录
第1章绪论    1
1.1目的及意义    1
1.2国内外研究现状分析    1
1.3研究（设计）的基本内容、目标、拟采用的技术方案及措施    3
1.3.1基本内容    3
1.3.2目标    3
1.3.3技术方案及措施    3
第2章馈能式减振器现有方案对比分析    4
2.1静液蓄能式能量回收型减振器    4
2.2 电磁线圈感应式能量回收型减振器    4
2.3齿轮齿条式能量回收型减振器    5
2.4 滚珠丝杆式能量回收型减振器    6
2.5曲柄连杆式能量回收型    7
2.6直线电机式能量回收型减振器    8
2.7对以上几种方案的评价    8 [资料来源：www.THINK58.com]
第3章液电馈能式减振器的方案设计与参数选型    10
3.1方案设计    10
3.2参数选型    11
3.2.1液压缸    11
3.2.2液压马达    13
3.2.3蓄能器    14
3.2.4管路和单向阀    15
3.2.5发电机的选型    16
3.3小结    16
第4章液电馈能式减振器存在的问题分析与改进    17
4.1存在的问题    17
4.2改进的措施    18
第5章全文总结与展望    21
5.1全文总结    21
5.2展望    21
参考文献    22
致谢    23

[资料来源：http://think58.com]