优秀的毕业设计论文网
计算机 JAVA 电子信息 单片机 机械机电 模具 土木工程 建筑结构 论文
热门搜索词:网络 ASP.NET 汽车 电气 数控 PLC

五层4569平米扬州某图书发行大楼的设计(含建筑图结构图)

以下是资料介绍,如需要完整的请充值下载.
1.无需注册登录,支付后按照提示操作即可获取该资料.
2.资料以网页介绍的为准,下载后不会有水印.资料仅供学习参考之用.
  
资料介绍:

五层4569平米扬州某图书发行大楼的设计(含建筑图结构图)(任务书,开题报告,外文翻译,论文计算书18000字,,CAD建筑图9张,CAD结构图9张)
摘 要
本工程为实际应用课题,位于扬州市江都,该工程为图书发行大楼,横向3跨,中间跨度为3m。房屋总高约22m,共5层,建筑场地约48 m *19 m。要求采用钢筋混凝土多层框架结构。在正常情况下,本工程的合理设计使用年限为50年,建筑结构的安全等级为二级。建筑结构的安全等级为二级。设防烈度为7度,设计基本地震加速度值为0.15g,工程场地为Ⅱ类。基本风压基本风压值:W0 = 0.40 kN/m2,基本雪压值:S0 = 0.35 kN/m2。 [资料来源:http://www.THINK58.com]
根据建筑设计和结构承重、抗震方面的要求以及场地地质条件,合理地进行结构选型和结构整体布置,确定各种结构构件的尺寸,选取一榀主要横向结构框架进行结构设计计算,用计算结构力学程序对该榀结构框架进行电算与手算结果进行对比分析;完成楼梯设计和基础设计;用PKPM软件对整栋框架结构进行PKPM电算;绘制出相关建筑和结构施工图。
在设计过程中,结构设计严格遵守相关的要求,对整个设计的各个环节进行综合全面的科学性考虑。总之,适用、安全、经济、适用是本设计的原则。通过毕业设计,综合应用四年所学的专业知识,使我专业水平得到很大提高,为我将来的工作打下了坚实的基础。
关键词:结构;设计;框架
 
yangzhou book distribution building
Abstract
This project is a practical application subject, is located in Jiangdu, the project is the book distribution building, horizontal three-span,  the middle-span is 3m. Housing a height of about 22 meters, a total of 5 layers, building site about 40m*40m. Require the use of reinforced concrete multi-storey frame structure. Under normal circumstances, the rational design of the project life of 50 years, the security level of the building structure is secondary. Security level for the two building structures. Fortification intensity is 7 degrees, the basic design earthquake acceleration is 0.15g, the project site for the Class Ⅱ. The basic wind pressure value of basic wind pressure: W0 = 0.40 kN/m2, the basic snow pressure vulua: S0 = 0.35 kN/m2.

[资料来源:http://THINK58.com]

According to architectural design and structural loading, seismic requirements and site geological conditions, a reasonable structural selection and the overall layout of the structure to determine the dimensions of various structural members, select a transverse specimens of the main structural framework for structural design calculations, with the calculated structure structural mechanics framework program of the specimens of Computing and hand calculated results were analyzed; complete staircase design and basic design; PKPM software used throughout the frame structure PKPM Computing; draw up the relevant architectural and structural drawings.
In the process of design, structure design and strictly abide by relevant requirements, all aspects of the design of a comprehensive scientific considerations. In short, application, security, economic, applicable are the design principle. Through the graduation design, the comprehensive application of the professional knowledge learned in four years, that made my professional level has been greatly impovered, and lay a solid foundation for my future work.
[来源:http://www.think58.com]

Keywords:  structural ; design ; frame

工程为五层钢筋混凝土框架结构体系,横向三跨,中间跨度为3m,共5层,建筑场地约48 m×19m。在正常情况下,本工程的合理设计使用年限为50年。
1.1 气象资料
1.基本风压值:W0 = 0.40 kN/m2
2.基本雪压值:S0 = 0.35 kN/m2
1.2 水文地质资料
1.场地条件:
根据勘测报告,拟建场地地势平坦,表面为杂填土;无液化土层分布,稳定地下水位埋深0.72-1.14m,对钢筋混凝土无侵蚀性。
本工程为多层框架结构,建筑结构的安全等级为二级。拟建场地抗震设防烈度7度,设计基本地震加速度值为0.15g。工程场地Ⅱ类。
  [来源:http://think58.com]

五层4569平米扬州某图书发行大楼的设计(含建筑图结构图)
五层4569平米扬州某图书发行大楼的设计(含建筑图结构图)
五层4569平米扬州某图书发行大楼的设计(含建筑图结构图)
五层4569平米扬州某图书发行大楼的设计(含建筑图结构图)
五层4569平米扬州某图书发行大楼的设计(含建筑图结构图)
[资料来源:http://www.THINK58.com]

五层4569平米扬州某图书发行大楼的设计(含建筑图结构图)
五层4569平米扬州某图书发行大楼的设计(含建筑图结构图)
五层4569平米扬州某图书发行大楼的设计(含建筑图结构图)


目录
摘    要    I
Abstract    II
第一章  结构选型与布置    1
1.1 气象资料    1
1.2 水文地质资料    1
1.3荷载资料    2 [资料来源:THINK58.com]
第二章  确定计算简图    4
2.1 结构布置    4
2.2梁、柱截面尺寸    5
2.3材料强度等级    5
2.4荷载计算    5
第三章  框架内力计算    16
3.1恒载作用下的框架内力    16
3.2活载作用下的框架内力    23
3.3风荷载作用下内力计算    29
3.4地震作用下横向框架的内力计算    33
第四章 框架内力组合    44
第五章 框架梁柱截面设计    52
第六章 楼梯结构计算设计    65
6.1梯段板计算    65
6.2休息平台板计算    66
6.3梯段梁TL1计算    67
第七章 现浇楼面板设计    69
7.1跨中最大弯矩    69
7.2求支座中点最大弯矩    70
第八章 基础设计    74
8.1荷载计算    74
8.2确定基础底面积    75

[资料来源:THINK58.com]

8.3地基变形验算    77
8.4基础结构设计(混凝土选用C30)    77
参考文献    82
致谢    83

  [版权所有:http://think58.com]