优秀的毕业设计论文网
计算机 JAVA 电子信息 单片机 机械机电 模具 土木工程 建筑结构 论文
热门搜索词:网络 ASP.NET 汽车 电气 数控 PLC

某小区消防供水系统设计(S7-200)(含CAD电气图)

以下是资料介绍,如需要完整的请充值下载.
1.无需注册登录,支付后按照提示操作即可获取该资料.
2.资料以网页介绍的为准,下载后不会有水印.资料仅供学习参考之用.
  
资料介绍:

某小区消防供水系统设计(S7-200)(含CAD电气图)(任务书,开题报告,论文说明书12000字,CAD图23张,PLC程序)
摘要
21世纪以来,科学技术和经济飞速发展,各式各样的高层建筑、地下建筑和综合性建筑日益增多。在这些建筑增多的同时,火灾的隐患也大大增加,火灾发生的次数以及火灾对经济造成的损失、对人所造成的伤害也呈现出了一个上升的趋势。这无疑对所有建筑的消防系统有了更高的要求,传统的手动控制的消防方式已经不再能满足如今的高层建筑,所以,在同样飞快发展的科技实力的支持下,出现了新型的消防自动控制系统。
本文的主要内容有:
首先,确定设计控制方案包括:消防泵,喷淋泵,排污泵,稳压泵的具体控制,其中还包括了消防泵和喷淋泵的星三角启动,其他每个泵的自动与手动控制、自动控制时的启动条件以及常用泵故障时备用泵的切换,泵的一次回路二次回路图,并对所有在CAD图纸中出现的各种元器件进行选型;其次,进行PLC软件的设计,其中包括PLC的选型,I/O口的分配,软件的编写;然后用MCGS组态软件进行上位机监控界面的绘制以及实现与PLC的通讯,以此来验证系统的功能是否已完善。
关键词:消防系统控制火灾自动报警消防泵喷淋泵排污泵稳压泵 MCGS

[资料来源:http://think58.com]


 
A community fire water supply system design
ABSTRACT
With the rapid development of economy and technology, a wide range of high-rise buildings, underground buildings and comprehensive building is increasing. In these buildings increased at the same time, a fire hazard greatly increased the number of fires and fire losses to the economy caused by the damage caused to people also showed a rising trend. This is undoubtedly the fire protection system for all buildings have higher requirements, the traditional way to manually control the fire is no longer able to meet today's high-rise buildings, so the support of the same fast development of science and technology strength, with the emergence of a new type of fire Automatic Control System.
The main contents of this paper are as follows:
First, make sure the design control program include: fire pump, spray pump, sewage pump, the voltage stability of pump concrete control, including fire pump and spray pump star triangle start, every other automatic and manual control, automatic control of pump start of conditions and the common fault when the standby pump switch, a secondary loop circuit diagram, pump and for all in the selection of various components in the CAD drawings; Secondly, for the design of PLC software, including PLC selection, the distribution of the I/O port, the writing of the software; Then use the MCGS configuration software in PC monitor interface drawing as well as the realization of communication with PLC, in order to verify whether the function of the system has been improved. [版权所有:http://think58.com]
Key words: Fire control system;automatic fire alarm;sprinkler pump;fire pump sewagepump;Voltage stabilizing pump
 

[资料来源:http://think58.com]

某小区消防供水系统设计(S7-200)(含CAD电气图)
某小区消防供水系统设计(S7-200)(含CAD电气图)
某小区消防供水系统设计(S7-200)(含CAD电气图)
某小区消防供水系统设计(S7-200)(含CAD电气图)
某小区消防供水系统设计(S7-200)(含CAD电气图)
[资料来源:http://THINK58.com]

某小区消防供水系统设计(S7-200)(含CAD电气图)
某小区消防供水系统设计(S7-200)(含CAD电气图)
某小区消防供水系统设计(S7-200)(含CAD电气图)
某小区消防供水系统设计(S7-200)(含CAD电气图)


目录
摘要    I
ABSTRACT    II [资料来源:http://THINK58.com]
第一章绪论    1
1.1研究背景    1
1.2 国内外消防控制系统的发展现状    2
1.2.1 消防控制系统的发展历程    2
1.2.2 国外消防发展近况    2
1.2.3 国内消防发展近况    3
1.3 课题的研究目的及其意义    3
1.4 课题的主要工作    4
第二章消防控制系统的具体实现    5
2.1 消防泵电气控制装置    5
2.1.1 PLC消防灭火的控制系统模块    5
2.1.2 消防泵的星三角启动电路原理    6
2.1.2 消防泵的二次控制回路    7
2.2 喷淋泵电气控制装置    7
2.2.1 喷淋泵的星三角启动电路原理    8
2.2.2 喷淋泵的二次控制回路    8
2.3 排污泵的电气控制装置    9
2.3.1 排污泵的启动    9
2.3.2 排污泵的控制回路图    10
2.4 稳压泵的消防控制装置    11 [资料来源:http://think58.com]
2.4.1 稳压泵系统的工作原理    11
2.4.2 稳压泵的启动    11
2.4.3 稳压泵的二次回路图    12
2.5各元器件的选型    12
2.5.1 消防泵的选型    12
2.5.2 喷淋泵的选型    13
2.5.3 排污泵的选型    13
2.5.4 稳压泵的选型    13
2.5.5 各硬件的选型    14
第三章 PLC程序和监控界面    16
3.1 PLC 程序设计    16
3.1.1 消防泵启动流程图    16
3.1.2 喷淋泵启动流程图    17
3.1.3 排污泵启动流程图    17
3.1.4 稳压泵启动流程图    18
3.1.5 I/O口的分配    19
3.1.6 S7-200的网络通信    21
3.2 组态软件程序设计    22
3.2.1 组态软件介绍    22
3.2.2监控界面的设计    23
3.2.3 MCGS与S7-200PLC的通讯    25

[资料来源:http://www.THINK58.com]

第四章总结与展望    27
参考文献    28
致谢    29 [资料来源:THINK58.com]