优秀的毕业设计论文网
计算机 JAVA 电子信息 单片机 机械机电 模具 土木工程 建筑结构 论文
热门搜索词:网络 ASP.NET 汽车 电气 数控 PLC

卫星通信系统链路设计与仿真(硕士)

以下是资料介绍,如需要完整的请充值下载.
1.无需注册登录,支付后按照提示操作即可获取该资料.
2.资料以网页介绍的为准,下载后不会有水印.资料仅供学习参考之用.
  
资料介绍:

卫星通信系统链路设计与仿真(硕士)(论文25000字)
摘  要
无线通信的快速进步影响着卫星通信的发展,卫星通信其固有的优势也推动了许多国家的大力研制,其优点被广泛应用于应急通信、国家安全、载人航天等重大领域。卫星通信系统研制一般先对系统链路进行设计,保证所建立的系统拥有较好的性能。在通信链路设计地基础上利用计算机辅助技术建立系统模型并对其仿真分析,通过仿真分析为系统正确设计建模提供了有效的数据依据。
卫星通信链路传播距离较远,链路开放透明等特性对信号的影响是链路设计考虑的根本问题。本文对链路传输中存在的损耗进行分析,计算无线电波的大气吸收损耗和降雨衰减;将计算的链路总衰减应用于链路设计预算中,分析并计算出卫星通信链路设计的关键性指标。同时利用系统建模软件SystemVue按照链路技术指标对地面站发射、卫星转发器、地面站接收进行设计建模并做进一步分析验证,对整个系统及链路进行误码率(BER)仿真来测试系统的性能。为了分析系统的抗干扰性能,本文搭建了上行/下行链路干扰模型,设计了干扰仿真软件平台;最后是本文课题内容的总结,探索系统设计及仿真工作的不足之处,展望卫星通信系统链路仿真设计的前进方向。通过本文系统链路的设计,可以给卫星通信系统链路设计者提供有效参考。

[来源:http://think58.com]


关键词:卫星通信系统;链路设计;系统建模;干扰仿真;软件操作平台
Abstract
The rapid progress of wireless communication has affected the development of satellite communications. The inherent advantages of satellite communication have also promoted the vigorous development in many countries. Its advantages are widely used in major fields such as emergency communications, national security and manned space flight. The development of satellite communication system generally design the system link first to ensure that the established system has better performance. Based on the design of communication links, the system model is established by using computer-aided technique and its simulation analysis is carried out, which provides an effective data basis for the correct design and modeling of the system through simulation analysis.
Satellite communication link propagation distance, the link open and transparent and other characteristics of the signal is the link design considerations fundamental issues. In this paper, the loss of link transmission is analyzed to calculate the atmospheric absorption loss and rainfall attenuation of radio waves. The calculated total link attenuation is applied to the link design budget, and the key to the design of the satellite communication link is analyzed and calculated index. At the same time, the system modeling software SystemVue is used to design and model the ground station transmission, satellite transponder and ground station reception in accordance with the link technical indicators, and further analyze and verify the BER and BER of the entire system and link Performance. In order to analyze the anti-jamming performance of the system, this paper sets up the uplink / downlink interference model and designs the interference simulation software platform. Finally, this paper summarizes the content of the project, explores the shortcomings of the system design and simulation work, and prospects the satellite communication system Link simulation design of the forward direction. Through the design of the system link in this paper, we can provide an effective reference to the link designers of satellite communication systems.
[资料来源:http://think58.com]

Keywords: Satellite Communication System; Link Design; System Modeling; Interference Simulation; Software Operation Platform
 
目  录
摘  要    I
ABSTRACT    II
目  录    III
第一章 绪  论    1
1.1选题依据和课题研究目的和意义    1
1.2 国内外研究现状    2
1.3本文的内容安排    4
第二章 卫星通信链路的技术分析    1
2.1 卫星通信系统链路概述    1
2.2 无线电波传播特性    2
2.2.1 大气吸收损耗    3
2.2.2降雨衰减    4
2.2.3 自由空间传输损耗    5
2.3 通信链路的预算分析    6
2.3.1 天线系统    6
2.3.2 系统内部噪声分析    7
2.3.3 载噪比的计算    8
2.3.4 误码率计算    10
2.4 本章小结    11
[资料来源:www.THINK58.com]

第三章 卫星通信系统链路的仿真设计    12
3.1 仿真方法及软件概述    12
3.2仿真应用模块分析与介绍    13
3.3基于SYSTEMVUE卫星通信系统链路仿真    16
3.3.1卫星通信链路设计    16
3.3.2 地面站及空间链路建模仿真    19
3.3.3 卫星通信转发器建模仿真    22
3.4 误码率仿真分析    25
3.5 本章小结    27
第四章 卫星通信链路干扰仿真分析    28
4.1 上行链路干扰    28
4.1.1 欺骗式攻击仿真建模    28
4.1.2 压制式干扰仿真分析    30
4.2 下行链路干扰    32
4.2.1 欺骗式攻击仿真建模    32
4.2.2 压制式干扰仿真分析    33
4.3 软件平台设计    36
4.3.1 Matlab与SystemVue接口介绍    36
4.3.2 软件平台设计与实现    36
4.4本章小结    37 [版权所有:http://think58.com]
第五章 总结与展望    38
5.1 全文总结    38
5.2 工作展望    38
参考文献    40
致  谢    43
[资料来源:http://THINK58.com]